Cobra-electronics INTELLILINK XRS R9G Instrukcja Użytkownika Pobierz pdf (Strona 8)

English

Installation Overview

Mount Unit

Main Detector Unit (MDU)

Note: To power the MDU, use one of the two power cords provided

(See Page A3).

• 12V Power Cord with In-line Fuse for Hardwired Installation:

For connection to vehicle’s fuse box or battery, or

• 12V Power Cord with In-line Fuse and Cigarette Lighter Plug:

For connection to 12-volt vehicle accessory outlet (cigarette lighter

plug).

Fuse box hard wiring is recommended. Use this configuration to

provide a more discreet installation. If you are unsure about making

this connection yourself, contact a professional installer. Cobra

does not warrant any damages to the product or vehicle that may

occur as a result of improper installation.

On a negative grounded vehicle:

1. Connect the positive wire [marked with a tag (+)] of the DC power cord

to an accessory 12V fuse that is controlled by the ignition switch

(Figure A).

2. Connect negative wire (-) to a chassis ground location (Figure A). Body

paint may need to be removed to assure a good ground connection.

Introduction

ACC

Figure A

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 48 49

Brak uwag

Cobra-electronics INTELLILINK XRS R9G Instrukcja Użytkownika Strona 8